Semi Commercial RO Water Filter ( 300 – 800GPD)

60,000.00

Features:

    • 5 Stages Advance Reverse Osmosis Water Filtration Process
    • 300-800 Gallon Per Day Production
    • 20 ” Filter Housing With Stand
    • 0.0001 Micron Membrane Size
    • FDA Approved Polypropylene Made Flat Cap Housing
    • Imported Cartridges and Filter Housing
    • Fully Automatic Shut-off Valve
    • Long Reach Chrome Faucet
    • Completely Assembled in Taiwan
    • 100% Factory Tested and Sterilized Ready for Installation.
SKU: PP-Semi Commercial Category:

Description

What Is Reverse Osmosis Water Filter?

Reverse osmosis (RO) is a method of water treatment that removes salt from seawater. This process is also called water desalination. The reverse osmosis water filters are used for purifying drinking water. In the process of this system, the untreated water molecules are forced through a semi-permeable membrane, which blocks the impurities and contaminants. So they are subsequently expelled from the environment to produce clean drinking water.

Reverse osmosis systems can remove different types of molecules and ions from solutions. These water filters are widely used in both production of drinking water and for industrial purposes.

How Does Reverse Osmosis Work?

how reverse osmosis worksReverse osmosis is a process also known as hyperfiltration. It works by decreasing the particles to the molecular level, which creates clean water. Reverse osmosis filters lower the salt level as well as other water pollutants, producing high quality pure water.

Most of the reverse osmosis systems work the same way. However, their performance can be affected by different factors. They include the incoming water pressure, the quality of filters and membranes, water temperature and the type and number of TDS (total dissolved solids).

The reverse osmosis system works by pushing the water coming from the tap through a membrane and filter. It can also be a series of them. The membrane allows only the water to pass, while the contaminants and impurities are left behind and flushed down the drain. The pure water is then delivered to a holding tank that you can access when you turn on the faucet.

Lets take a closer look at the steps a reverse osmosis system includes.

  • Stage 1

    The water passes through a high capacity polypropylene sediment filter. It’s a 10-inch filter that removes all the larger particles up to 5 microns, including rust, dust and sediment. So it removes the particles that can affect the taste and color of the water or could potentially clog the system.

  • Stage 2

    For the second stage, Its incorporates a granular activated 10-inch carbon filter. It also eliminates contaminants up to 5 microns. This is a pre-filter for the next stage. During the second stage the water gets rid of the unpleasant chlorine, foul taste and odor, colors and cloudiness.

  • Stage 3

    Next the water goes through a denser carbon block filter. It’s also a 5 micron filter that further removes any residual CTO (chlorine, taste and odor). At this stage the filter also removes the difficult-to-remove chemicals, including chloramines. This is the stage that turns the water into something you can drink.

  • Stage 4

    In the 4th stage water is pressed through the heart of the RO system – the high rejection TFC membrane with tiny holes of .0001 micron. This is the same technology that is used by companies in the production of bottled water. This NSF certified semi-permeable membrane effectively removes TDS (total dissolved solids), lead, arsenic, sodium, cysts, giardia, chromium, and a long list of other contaminants.

  • Stage 5

    The final stage utilizes a finer GAC filter, which acts as a final polishing inline filter. As the water leaves the storage tank, this filter removes any left residual tastes and odors.

Reviews

There are no reviews yet.

Be the first to review “Semi Commercial RO Water Filter ( 300 – 800GPD)”

Your email address will not be published. Required fields are marked *